Skip to main content

Radiant Pipe in Slab


Radiant Pipe System

  • Radiant heating is hardly a new technology. 
  • Radiant heating systems provide heat on the basis of low heating surface temperatures over a large area and an even air temperature distribution with mild, comfortable radiated energy.
  •  In contrast to conventional forced-air systems, a radiative equilibrium is generated between people and the surfaces throughout the room, more closely achieving the optimum thermal comfort level for occupants.
  •     Radiant heating and cooling systems can be used in commercial, residential, education, and recreational buildings, museums, hospitals, and other type of buildings.









             Diameter of Radiant pipe is 20 mm
             
             Length of pipe is 12 m
             Each slab has 12 loops
             Spacing is 150 mm
             Cover from bottom is 50 mm
             Cover from top is 50 mm
            And its thickness is 2 mm
           
Gauge pressure: -    It used to measure the water pressure under pipe
                                  Maintain temperature 60-70 psi,     (pounds per square inch)
                                                                                4 Kg/cm2 -4.5 Kg/cm2








What Makes Radiant Heating Ideal for Human Comfort?
Science shows that heat emission from the human body occurs mainly via three mechanisms: radiation, evaporation and convection. Humans feel most comfortable when they can regulate at least 50% of their heat emission via radiation, and when their feet are warmer than their heads.

Here you can see laid Radiant pipe in slab.








How it Works

  • Traditional heating systems only heat the air in a room, and usually with air that's been warmed with a furnace and forced through vents.
  • But forced air often produces uneven room temperatures and can carry allergens and contaminants, making a potentially unhealthy and uncomfortable environment.
           Radiant heating is quiet, clean and economical.
The system works by circulating warm water through a network of polymer pipes placed in the floor, wall or ceiling. Heat gently radiates from the panel, evenly and consistently warming the surfaces, objects and air to create a comfortable environment.
A variety of heat sources can be used to warm the water for a radiant system, including boilers, geothermal heat pumps, solar collection systems and water heat.
Advantages:
 Increased Comfort
A radiant heating system keeps floors warm and dry, making hard surface flooring more comfortable.

Energy Efficient

Because of its exceptional comfort at relatively low operating temperatures, radiant heating is very energy efficient. Optimizing the radiant panel design using strategies such as room-by-room zoning can add to your energy savings. Radiant heating can be the primary heat source or serve in combination with auxiliary heating systems, and can be installed almost anywhere heat is needed.

Enhanced Control
it’s easy to zone a radiant heating system using multiple thermostats. This allows you to adjust temperatures in a single room or a group of rooms, based on activity and usage levels.

Flexibility
Radiant pipe heating can be used in floors, walls and ceilings and can be installed in a single room or throughout your home or building. There are no heaters, radiators or vents, so you'll have more design freedom and open space. Radiant heating is ideal for open floor plans, especially in areas with high ceilings.

Improved Energy Efficiency

Radiant pipe heating allows a thermostat to be set up to 4ºF (2ºC) degrees lower than with a traditional hot air system without sacrificing comfort. Lower operating temperatures reduce fuel consumption, which can save up to 30% per year in heating expenses. And since radiant heating can be used with a variety of heat sources including geothermal heat pumps, solar collection systems and condensing boiler technology, you can acheive even further savings.


If you find this article helpful , Please share and subscribe .

I always Update helpful information and share my practical experience at this site.

Download this drawing in Pdf  Click here

Join Our YouTube Channel Click here  


Please Give your feedback in comment box


Comments

Popular posts from this blog

IS 1200 All Parts (1 to 28) – Free Download PDF for Site Engineers & Billing

Method of Measurement IS Codes – Afroz Civil 👷 Introduction In civil engineering projects, measurement is the foundation for estimation, costing, billing, and project planning . Without a standard method, every engineer or contractor may interpret work differently. To remove this confusion, the Bureau of Indian Standards (BIS) published IS 1200 – Method of Measurement of Building & Civil Engineering Works . These codes ensure uniformity, transparency, and accuracy in construction measurement. Whether you are a Site Engineer, Billing Engineer, Project Manager, Contractor, or Client , IS 1200 is a must-have reference. At Afroz Civil , we have compiled the complete list of IS 1200 parts with free PDF download links so you can easily save them in your Laptop/PC and use them whenever required on site. 📚 IS 1200 – Method of Measurement (All Parts) IS Code Part Work Description Download Link (PDF) IS1200 Part 1 Earthwork Download PDF IS 1200 Part 2 Concr...

Rate Analysis Excel Sheet Download | AOR, SOR, DSR Templates – Afroz Civil

About Rate Analysis   Rate Analysis, Civil Engineering, AOR, SOR, DAR, Labour Output Constants, Construction Estimation, Costing, Billing, Material Cost, Machinery Cost, Afroz Civil Rate Analysis in civil engineering is a complete scientific method used to calculate the actual unit cost of construction activities. A proper rate analysis includes the breakdown of material, labour, machinery, overheads, contractor profit, taxes , and productivity norms. Accurate rate analysis ensures transparent billing , precise estimation , cost control , and efficient project management . It forms the foundation of the Analysis of Rates (AOR) and aligns with the Schedule of Rates (SOR/DAR) published by CPWD, PWD and State Engineering Departments. These codes help engineers maintain standard, uniform and technically correct cost calculations across all construction activities. Abbreviations Used in Rate Analysis: In this article, several important engineering abbreviations have been used, an...

Types Of Level In Construction

Complete Guide to Construction Levels Complete Guide to Construction Levels with Practical Explanations In construction and civil engineering, different levels are used to ensure proper alignment, stability, drainage, and functionality. Below is a step-by-step explanation of each level in logical order, with practical examples to help you understand them better. 1. Natural Ground Level (NGL) – The Original Surface Definition: The existing level of the ground before any excavation or filling. Practical Example: Imagine you buy land with an uneven surface. The NGL is the starting point before any construction activity. Why It’s Important? Used as a reference for leveling, excavation, and filling. Helps determine how much soil needs to be removed or added. 2. Existing Ground Level (EGL) – After Site Preparation Definition: The level of the ground after site clearing, but before exc...

Social Media